ERGOFLEX Rubber Mat
Features & Benefits
- Non-skid
- Anti-fatigue mat
- Excellent thermal feature (ensuring truly efficient insulation)
- Reduces fatigue and lumbar pains
- Prevents occupational illnesses related to back problems
- Provides a safe, pleasant and comfortable atmosphere
- Durable
- Moisture, UV ray and oil resistant
- Resistant to extreme temperature changes
- Shock resistant
- Easy to install
- Safe product
- Easy maintenance (just wash with soapy water and rinse)
- Contributes to a better environment
- Made of 100% recycled rubber
Applications
They can be placed side to side to cover a greater surface. Can be screwed or glued directly to the floor.
Warranty
ErgoFlex mat has a 5-year warranty against manufacturer defects.
|
Code |
Description |
| NA4612 | Recycle Rubber Mat 48’’ x 72’’ x ½’’ (1.22m x 1.83m x 1.27cm) |
| NA4634 | Recycle Rubber Mat 48’’ x 72’’ x ¾ ‘’ (1.22m x 1.83m x 1.90cm) |
| TO3648 | Recycle Rubber Mat 36’’ x 48’’ x ½’’ (91.44cm x 1.22m x 1.27cm) |
| EF4872 | Recycle Rubber Mat 48’’ x 72’’ x ½’’ (1.22m x 1.83m x 1.27cm) |
Product Specification
|
Code |
Length |
Width |
Height |
Weight |
|
NA4612 |
72 in. (1.83 m) |
48 in. (1.22 m) |
½ in. (1.27 cm) |
77 lbs (34.93 kg) |
|
NA4634 |
72 in. (1.83 m) |
48 in. (1.22 m) |
¾ in. (1.90 cm) |
96 lbs (43.55 kg) |
|
TO3648 |
48 in. (1.22 m) |
36 in. (25.4 cm |
½ in. (1.27 cm) |
38.5 lbs (4.85 kg) |
|
EF4872 |
72 in. (1.83 m) |
48 in. (1.22 m) |
½ in. (1.27 cm) |
77 lbs (34.93 kg) |
Made from: Made of 100% recycled rubber
Shape: Rectangular
Color: Black
Technoflex Rubber Mats
TECHNICAL DATA SHEET
Standard Tests Results
ASTM D-2240 Specific gravity 1.14
Hardness, toughness +/- 70 durometer Shore A
ASTM D-412 Resistance to traction 777 PSI
ASTM D-412 Modules 100% 352 PSI
ASTM D-412 Tensile strength (max.) 160%
ASTM D-624 Tear resistance 111 pounds/inch
ASTM D-3389 Abrasion resistance (tobacco) 0.41 mgr/k
ASTM D-257 Electric arc resistance (D.C.) 0.7 Million OHMS
ASTM D-1894 Friction coefficient 0.825
ASTM D-1777 Resistance to penetration 28% / 10%
CSA - A 126,10 Initial / residual
ASTM C-510 Thermic conductivity 1.052 BTU
Chemical resistance Strong mineral acid Good
C.R.C. Oxidizing Acid (concentrated) Weak
Strong alkaline base Good
Hydrocarbon aliphatic Average
Petroleum oils Good
Products Min. Max.
Material Recycled rubber crumbs (tires) Acetone Extract 10.0% 19.0%
Ash content - 8.0%
Carbon black content 28.0% 39.0%
Moisture content - 0.75%
Rubber hydrocarbon 42.0% -
Free Iron - 0.02%
Free fabric content - 0.75%
Bulk density (typical) 100 gm/210 cc
Colour Black
In flammability C.P.S.C. FF 170
Expansion 8.3 x 10-5 in/in °F
Width 1.22 m or 4 feet
Length 1.83 m or 6 feet
Thickness 1.2 cm, 1.8 cm or 1/2", 3/4"
Manufacturing process: Pressure mould with continuous baking in monolayer.
Models
The models available are either plain or hexagon shape (beehive). Underneath the mat there are longitudinal grooves spaced at 18 mm (3/4") to allow air circulation, 6.3 mm (1/4") wide x 3.5 mm (1/8") depth. On special request, Technoflex can provide its customers with groove-less mats, bevelled edge(s), interlocked edge(s) or mats cut to requested sizes.
The mats are made of recycled rubber crumbs, originating from various products not specifically known, can result in slight variations in dimension of the finished product. This mat is designed to be used as a floor covering and should not be altered for other uses.
Warranty
Our mats have a limited warranty against premature wear or manufacturing defects for a period of five (5) years.
Installation
Floor preparation: The surface that will receive the Technoflex mat has to be dry, clean, smooth and free of oil stains and any other chemicals. The expansion joint in the floor, the deep splits and the uneven surface must be filled and levelled out with a good-quality product. Only the contractor can determine whether or not the surface (area) can adequately covered with the rubber mats. If the area is subject to dense humidity, underground or ground level, a test must be done to establish the degree of humidity contained in the concrete.
Temperature: Technoflex mats and the supplies must be maintained at room temperature (20°C or 72°F). Since rubber characteristics vary with changes in temperature, it is important that the Technoflex mats be stored for a period of 72 hours prior to installation in the area to be covered. We recommend the use of our adhesive. After laying down the material, it must be rolled with a 35 kg (75 lb.) roller.
Be sure to use the correct cleaning agent, sealer and finishing product.
Maintenance: Commercial, industrial and household uses.
We recommend that you never use alkaline products such as a cleaning agent. A normal cleaning agent used properly will maintain your floor in a good condition with a good looking surface. To get more details on other products to use and hard-to-remove stains and to obtain a glossy finish, please do not hesitate to call us.
Note
It is important that the manufacturer's installation specifications be followed at all times. Good floor preparation includes the use of a proper adhesive.
Caution
The black carbon (an ingredient in the rubber) used in the manufacturing of the mat has electric conductivity.