REFLEXTOR Speed Bump

Features & Benefits

• Durable, maintenance free
• Moisture, UV ray and oil resistant
• Resistant to extreme temperature changes
• Easy installation
• Can be installed by one individual in a few minutes.
• Flexible (adapts to road surface)
• Channelized bottom (2 x 1’’) for cabling, wire, hose and pipe protection.
• Safe product
• Contributes to a better environment
• Made of 100% recycled rubber

Applications

Effective speed reduction for roads and parking lots. It can be used for...

• School zones
• Hotel parking lots
• Playground areas
• Indoor & outdoor parking lots

Warranty

3-year warranty against manufacturer defects under normal use.

Code: SB48 (Y) -4’ (1.22m)
SB72 (Y) - 6’ (1.83 m)

Made from: Made of 100% recycled rubber

Dimension: 4’ (1.22m)
6’ (1.83 m)

Height: 2.25 in (5.71 cm)

Width: 11 in (27.94 cm)

Spikes: 4’ (1.22m) (3)
6’ (1.83 m) (5)

Weight: SB48 - 35 lbs (15.8kg)
SB72 - 52 lbs (23.6kg)

Color: Black

Reflector: 4’ (1.22m) (2) 
6’ (1.83 m) (4)

Reflector color

Available: Yellow

How to install rubber speed bump?

I. Drill holes into the asphalt through the holes already in the rubber speed bump. Make sure the holes are at least ½ inch wide and 3-4 inches deep.

II. Drive the ½ inch rebar spike through the holes in the rubber speed bump. Rebar Spikes should be 14 inches long.

III. Leave the rubber speed bump undisturbed for a minimum of 12 hours. Rubber speed bumps do not require maintenance but we recommend that you periodically check the spikes to see if they have come up. If they have, make sure to keep them hammered down below the surface of the speed bumps.