PARK-O-FLEX Parking curb

Features & Benefits

• Durable, maintenance free
• Moisture, UV ray and oil resistant
• shock resistant
• Resistant to extreme temperature changes
• Lightweight (for easy handling compared to concrete)
• Easy installation (compared to concrete curbs)
• Can be installed by one individual in a few minutes.
• Flexible (adapts to any road surface)
• Safe product
• Contributes to a better environment
• Does not damage vehicle on impact
• Made of 100% recycled rubber

Applications

Suitable for all types of parking lots (indoor, outdoor and multi-level) and can be installed to protect walls and other valuables.

Warranty

3-year warranty against manufacturer defects under normal use.

Product specification

Code: PC36 (Y) (B) (W) - 3’ (0.91m)
PC72 (Y) (B) (W) - 6’ (1.83 m)

Made from: Made of 100% recycled rubber

Dimensions : 3’ (0.91m)
6’ (1.83 m)

Height: 4.25 in (10.79 cm)

Width: 6 in (15.24 cm)

Spikes: 3’ (0.91m) (2)
6’ (1.83 m) (4)

Weight: PC36 -18 lbs (8.2kg)
PC72 - 36 lbs (16.32kg)

Color: Black

Reflector: 3’ (0.91m) (2)  
6’ (1.83 m) (4)

Reflector color
Available: Blue, Yellow & White

Specification Rubber Parking Curbs
(Park-O-Flex)

Product Description

1. Product Name:  Park-O-flex Rubber parking curbs

a)      Dimensions available:
(PC72)72’’ long x 6’’ wide x 4.25’’ high Total weight: 36 lbs
(PC36) 36’’ long x 6’’ wide x 4.25’’ high Total weight: 18lbs

1. Material: Compression molded 100% recycled rubber and polyurethane prepolymer.
2. Physical Properties

a)      Density: 0.6oz/cu. In. (ASTM C642)
b)      Durometer hardness:   70A +/- 7 (ASTM D2240)
c)       Tensile strength:  minimum 250 psi (ASTM D412)
d)      Compression deformation: 7% at 70 psi and 68 deg. F (ASTM D395)
e)      Brightness at low temperature: -40⁰F (ASTM D746)
f)       Freeze and thaw when exposed to de-icing chemicals: No lost after 50 cycles (ASTM C672)
g)      Coefficient of thermal expansion: 8 x 10^-6 in./in/⁰f (ASTM C 531)
h)      Weathering 70 hours at 150 deg. F (ASTM D573)

Result:

I.            Hardness retained:                        100% +/-5%
II.            Compressive strength:                 100% +/-5%
III.            Tensile strength:                            100% +/-5%
IV.            Elongation retained:                     100% +/-5%

1. Reflective Material: Technoflex ‘’Reflect guard’’ thermally embedded reflective material, complying with the following:
   1. Tensile strength with minimum 1000PSI (ASTM D2370)
   2. Elongation, 200 percent minimum (ASTM D2370)
   3. Abrasion, maximum 20mg loss (ASTM D4060)
2. Product features:

a)      Resistant to warping, cracking, chipping and rotting.
b)      Resistant to UV light, moisture, oil and extreme temperature variations.
c)       Flexible and capable of conforming to irregularities in paving surface.
d)      Finish: Black body with yellow, white or blue embedded glass reflective tape.

Warranty:

Technoflex recycled rubber speed bumps are guaranteed for 3 years with normal applications.

Manufacturer:

Technoflex, 922, Jacques-Paschini, Bois des Fillion, Québec, Canada, J6Z 4W4

Phone: 450-621-7888 Fax: 450-621-7884 Toll Free: 1-888-928-9444

How to install the parking curbs?

I. Drill holes into the asphalt through the holes already in the rubber parking curb. Make sure the holes are at least ½ inch wide and 3-4 inches deep.

II. Drive the ½ inch rebar spike through the holes in the rubber parking curb. Rebar Spikes should be 14 inches long.

III. Leave the rubber parking curb undisturbed for a minimum of 12 hours. Rubber parking curbs do not require maintenance but we recommend that you periodically check the spikes to see if they have come up. If they have, make sure to keep them hammered down below the surface of the parking curb.